Pharmacodynamic Studies of Pravastatin Sodium Nanoemulsion Loaded Transdermal Patch for Treatment of Hyperlipidemia.

Pravastatin sodium (PVS) is a hypolipidemic drug with poor oral bioavailability due to the first-pass effect. Therefore, this study aims to formulate and evaluate transdermal patches containing PVS-loaded nanoemulsions (PVS-NEs) to increase PVS's hypolipidemic and hepatoprotective activities. PVS-NEs were prepared using the aqueous titration method, where oleic acid was chosen as an oil phase, and span 80 and tween 80 were used as surfactant and cosurfactant respectively. Droplet size (DS), polydispersity index (PDI), zeta potential (ZP), clarity, and thermodynamic stability of NEs were all characterized. Also, PVS-NEs (NE2) with 50% oil phase, 40% SC mix 2:1, and 10% water were selected as an optimum formula based on the results of DS (251 ± 16), PDI (0.4 ± 0.16), and ZP (-70 ± 10.4) to be incorporated into a transdermal patch, and PVS-NE2 loaded transdermal patches (PVS-NE2-TDPs) were prepared by solvent evaporation method. F1 patch with HPMC E15 and PVP K30 in a ratio of 3:1 represented satisfactory patch properties with good drug-excipients compatibility. Thus, it was selected as an optimum patch formula. The optimized F1 patch was characterized for thickness, moisture content, weight variation, and drug-excipients incompatibility. Therefore, it was subjected to ex vivo skin permeation and finally pharmacodynamic studies. Ex vivo permeation studies of F1 revealed that the cumulative amount of PVS permeated across rat skin was 271.66 ± 19 µg/cm2 in 72 h, and the pharmacodynamic studies demonstrated that the F1 patch was more effective in treating hyperlipidemia than PVS-TDP (control patch) based on both blood analysis and histopathological examination. .

Strategies for Improving Transdermal Administration: New Approaches to Controlled Drug Release.

In this work, we aim to address several strategies to improve transdermal drug delivery, such as iontophoresis, sonophoresis, electroporation and micron. We also propose a review of some transdermal patches and their applications in medicine. TDDs (transdermal patches with delayed active substances) are multilayered pharmaceutical preparations that may contain one or more active substances, of which, systemic absorption is achieved through intact skin. The paper also presents new approaches to the controlled release of drugs: niosomes, microemulsions, transfersomes, ethosomes, but also hybrid approaches nanoemulsions and microns. The novelty of this review lies in the presentation of strategies to improve the transdermal administration of drugs, combined with their applications in medicine, in light of pharmaceutical technological developments.

A Sustainable Solution to Skin Diseases: Ecofriendly Transdermal Patches.

Skin is the largest epithelial surface of the human body, with a surface area of 2 m2 for the average adult human. Being an external organ, it is susceptible to more than 3000 potential skin diseases, including injury, inflammation, microbial and viral infections, and skin cancer. Due to its nature, it offers a large accessible site for administrating several medications against these diseases. The dermal and transdermal delivery of such medications are often ensured by utilizing dermal/transdermal patches or microneedles made of biocompatible and biodegradable materials. These tools provide controlled delivery of drugs to the site of action in a rapid and therapeutically effective manner with enhanced diffusivity and minimal side effects. Regrettably, they are usually fabricated using synthetic materials with possible harmful environmental effects. Manufacturing such tools using green synthesis routes and raw materials is hence essential for both ecological and economic sustainability. In this review, natural materials including chitosan/chitin, alginate, keratin, gelatin, cellulose, hyaluronic acid, pectin, and collagen utilized in designing ecofriendly patches will be explored. Their implementation in wound healing, skin cancer, inflammations, and infections will be discussed, and the significance of these studies will be evaluated with future perspectives.

3D-printed EVA-based patches manufactured by direct powder extrusion for personalized transdermal therapies.

In recent years, 3D printing has attracted great interest in the pharmaceutical field as a promising tool for the on-demand manufacturing of patient-centered pharmaceutical forms. Among the existing 3D printing techniques, direct powder extrusion (DPE) resulted as the most practical approach thanks to the possibility to directly process excipients and drugs in a single step. The main goal of this work was to determine whether different grades of ethylene vinyl acetate (EVA) copolymer might be employed as new feedstock materials for the DPE technique to manufacture transdermal patches. By selecting two model drugs with different thermal behavior, (i.e., ibuprofen and diclofenac sodium) we also wanted to pay attention to the versatility of EVA excipient in preparing patches for customized transdermal therapies. EVA was combined with 30 % (w/w) of each model drugs. The physicochemical composition of the printed devices was investigated through Fourier-transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analyses. FT-IR spectra confirmed that the starting materials were effectively incorporated into the final formulation, and thermal analyses demonstrated that the extrusion process altered the crystalline morphology of the raw polymers inducing the formation of crystals at lower thicknesses. Lastly, the drug release and permeation profile of the printed systems was evaluated for 48 h and showed to be dependent on the VA content of the EVA grade (74.5 % of ibuprofen released from EVA 4030AC matrix and 12.6 % of diclofenac sodium released from EVA1821A matrix). Hence, this study demonstrated that EVA and direct powder extrusion technique could be promising tools for manufacturing transdermal patches. By selecting the EVA grade with the appropriate VA content, drugs with dissimilar melting points could be printed preserving their thermal stability. Moreover, the desired drug release and permeation profile of the drug can be achieved, representing an important advantage in terms of personalized medicine.

Pharmacokinetics and tissue distribution of five bioactive components in the Corydalis yanhusuo total alkaloids transdermal patch following Shenque acupoint application in rats assessed by ultra-performance liquid chromatography-tandem mass spectrometry.

The purpose of this study was to evaluate the pharmacokinetics and tissue distribution of the Corydalis yanhusuo total alkaloids transdermal patch (CTTP) following Shenque acupoint application in rats. The concentrations of corydaline, tetrahydropalmatine, tetrahydrocolumbamine, protopine, and dehydrocorydaline in rat plasma and various tissues were simultaneously detected by ultra-performance liquid chromatography-tandem mass spectrometry after Shenque acupoint administration of CTTP. Plasma, heart, liver, spleen, lung, and kidney tissue samples were collected at specific times and separated by gradient elution on an ACQUITY UPLC HSS T3 column (1.8 µm, 100 mm × 2.1 mm) with a mobile phase of 0.01% formic acid aqueous solution and acetonitrile-0.01% formic acid. The methodological results showed that the selectivity, linear range, accuracy, precision, stability, matrix effect, and extraction recovery of the established method met the requirements of biological sample analysis. The results indicated that CTTP following Shenque acupoint administration rapidly delivered adequate drug into rat blood and maintained an effective plasma level for a significantly longer time than non-acupoint administration. Furthermore, CTTP effectively reached the liver through Shenque acupoint administration and showed tissue selectivity. The data obtained could provide a prospect for the treatment of chronic pain with CTTP following Shenque acupoint application.

Formulation and Evaluation of Transdermal Patches Containing BGP-15.

BGP-15 is an active ingredient with many advantages, e.g., beneficial cardiovascular and anti-inflammatory effects. The transdermal administration of BGP-15 has great potential, which has not been investigated yet, despite the fact that it is a non-invasive and safe form of treatment. The aim of our study was to formulate transdermal patches containing BGP-15 and optimize the production with the Box-Behnken design of experiment. The most optimal formulation was further combined with penetration enhancers to improve bioavailability of the active ingredient, and the in vitro drug release and in vitro permeation of BGP-15 from the patches were investigated. FTIR spectra of BGP-15, the formulations and the components were also studied. The most optimal formulation based on the tested parameters was dried for 24 h, with 67% polyvinyl alcohol (PVA) content and low ethanol content. The selected penetration enhancer excipients were not cytotoxic on HaCaT cells. The FTIR measurements and SEM photography proved the compatibility of the active substance and the vehicle; BGP-15 was present in the polymer matrix in dissolved form. The bioavailability of BGP-15 was most significantly enhanced by the combination of Transcutol and Labrasol. The in vitro permeation study confirmed that the formulated patches successfully enabled the transdermal administration of BGP-15.

Comparison of the Transdermal and Intravenous Administration of Buprenorphine in the Management of Intra- and Postoperative Pain in Dogs Undergoing a Unilateral Mastectomy.

The aim of this prospective clinical study was to evaluate the effectiveness of transdermal patches of buprenorphine as an alternative route for the management of perioperative pain in dogs undergoing a unilateral mastectomy. Our hypothesis was that the transdermal route would allow the obtainment of an analgesic plan comparable to that of the injectable administration. Twelve dogs were divided in two groups. In the BupreP group (six dogs), buprenorphine patches were applied 40 h before the start of the surgery, guaranteeing a dosage of 5−6 µg/kg/h. In the BupreI group (six dogs), 20 µg/kg of buprenorphine was administered intravenously 30 min before the induction of anesthesia, and this was repeated every 6 h for 24 h. The main physiological parameters, sedation scores (0 = no sedation; 11 = deep sedation), and pain scores were monitored from 30 min before the surgery to 24 h after the end of anesthesia. All p values < 0.05 were defined as statistically significant. Thirty minutes before the surgery, the sedation scores were higher in BupreI (score = 10) compared to the BupreP group (score = 1). Moreover, during the mastectomy, the mean arterial pressure significantly increased in both groups even if nobody required additional analgesia. In the postoperative period, the pain scores did not show statistically significant differences between the two groups, maintaining values below the pain threshold at all times of the study. In conclusion, the transdermal administration of buprenorphine could guarantee an analgesic quality equal to that of the injectable route.

Sistemas de liberación prolongada de opioides: Analgesia y dependencia / Extended-release delivery systems of opioids: Analgesia and dependence

El consumo de analgésicos opioides ha experimentado un vertiginoso ascenso en las últimas décadas a nivel mundial. Este elevado consumo está relacionado con el aumento del número de prescripciones de opioides para el tratamiento del dolor crónico y por el aumento de la dependencia a opioides. Los analgésicos opioides tienen una corta duración de acción, siendo necesarias múltiples administraciones para obtener analgesia prolongada. El empleo de formulaciones de liberación prolongada permite espaciar los intervalos posológicos y estabilizar las concentraciones máximas de fármaco en sangre, favoreciendo el cumplimiento terapéutico y reduciendo el riesgo de desarrollar adicción. Sin embargo, estas formulaciones llevan dosis más altas de analgésicos opioides que las hacen más susceptibles de ser alteradas. Así, los avances en tecnología farmacéutica más recientes se han orientado hacia la aplicación de recursos tecnológicos disuasorios de su utilización por vías de administración alternativas con fines no terapéuticos. A su vez, los sistemas de liberación modificada también juegan un papel esencial en el tratamiento de la adicción a opioides: con el desarrollo de sistemas de administración parenteral capaces de prolongar la liberación de opioides durante meses se consigue superar una de las mayores dificultades para alcanzar el éxito del tratamiento en este tipo de pacientes como es el cumplimiento terapéutico. En este artículo se realiza una revisión bibliográfica de los diferentes sistemas de liberación prolongada de opioides que se encuentran actualmente autorizados en Europa y/o en Estados Unidos para el tratamiento del dolor y de la dependencia a opioides. (AU)

The consumption of opioid analgesics has increased drastically in the last decades worldwide. This high consumption is linked with a surge in the number of opioid prescriptions for the treatment of chronic pain and a surge in opioid misuse and addiction. Opioid analgesics have a short duration of action, making necessary frequent administrations to provide extended analgesia. The use of prolonged-release formulations enables dosing intervals to be spaced out and drug blood levels to be stabilized, improving therapeutic compliance, and reducing the likelihood of developing addiction. However, these formulations contain higher doses of opioid analgesics which make them more susceptible to be manipulated. Hence, the most recent advances in pharmaceutical technology have been oriented towards the application of abuse deterrent technologies aiming to prevent their administration through alternative routes. Moreover, prolonged- release systems also play an essential role in the treatment of opioid addictions with the development of parenteral dosage forms capable of prolonging opioid release for months that help overcome one of the most important drawbacks in achieving treatment success, namely, patient compliance. We review herein the different prolonged-release opioid dosage forms currently approved in Europe and/or the United States for the treatment of pain and opioid dependence. (AU)

Mussel-inspired poly(hydroxyethyl acrylate-co-itaconic acid)-catechol/hyaluronic acid drug-in-adhesive patches for transdermal delivery of ketoprofen.

This research aimed to create new hydrophilic drug-in-adhesive patches for transdermal drug delivery. Poly(hydroxyethyl acrylate-co-itaconic acid)-catechol (PHI-cat) and hyaluronic acid (HA) were used as main components in the pressure-sensitive adhesive. Citric acid and aluminium hydroxide were exploited as crosslinking agents and ketoprofen was employed as a model delivering compound. The adhesive performance, physicochemical properties, drug-polymer interaction, drug crystallization, drug content, drug permeation through the skin, and coordination polymer network of the patches were investigated. In addition, skin irritation and adhesion potential in human subjects were assessed. Due to the ability of catechol groups to form interaction with the skin tissue, the patches containing PHI-cat and HA offered a considerably greater adhesion ability to human skin compared with the patches without catechol and commercial patches. Furthermore, the patches had good physical and chemical stability. Therefore, these catechol-functionalized patches may be potential transdermal drug delivery systems with excellent adhesive properties for the delivery of a drug through the skin.

Bioinspired ketoprofen-incorporated polyvinylpyrrolidone/polyallylamine/ polydopamine hydrophilic pressure-sensitive adhesives patches with improved adhesive performance for transdermal drug delivery.

Inspired by the natural mussel adhesive mechanism, three different materials-polydopamine (PDA), polyvinylpyrrolidone (PVP), and polyallylamine (PAM)-were used to make innovative pressure-sensitive adhesives (PSAs) for transdermal delivery of ketoprofen. PDA was synthesized under alkaline conditions using a self-polymerization reaction and was exploited as a cross-linking agent due to its biocompatibility. The adhesive performance, physicochemical properties, drug content, and drug permeation through the skin were examined. Moreover, in vivo skin irritation and skin adhesion performance were investigated. PVP/PAM/PDA PSAs showed a significantly higher adhesion to human skin compared with commercial patches owing to the interaction between the catechol groups presented on the patches and the skin. In addition, the patches were stable for six months. Consequently, the PVP/PAM/PDA patches exhibited outstanding tissue adhesiveness, enabling universal tissue adherence while causing no skin tissue irritation or inflammatory reaction.

Formulation of Polymers-Based Methotrexate Patches and Investigation of the Effect of Various Penetration Enhancers: In Vitro, Ex Vivo and In Vivo Characterization.

The present study aimed to prepare methotrexate-loaded transdermal patches with different blends of hydrophobic and hydrophilic polymers (Eudragit S-100 and hydroxypropyl methylcellulose) at different concentrations. The polymers employed in transdermal patches formulations served as controlled agent. Transdermal patches were prepared using the solvent casting technique. The suitable physicochemical properties were obtained from the formulation F5 (HPMC and Eudragit S-100 (5:1). Various penetration enhancers were employed in different concentrations to investigate their potential for enhancing the drug permeation profile from optimized formulations. A preformulation study was conducted to investigate drug-excipient compatibilities (ATR-FTIR) and the study showed greater compatibility between drug, polymers and excipients. The prepared patches containing different penetration enhancers at different concentrations were subjected for evaluating different physicochemical parameters and in vitro drug release studies. The obtained data were added to various kinetic models, then formulated patch formulations were investigated for ex vivo permeation studies, in vivo studies and skin drug retention studies. The prepared patches showed elastic, smooth and clear nature with good thickness, drug content, % moisture uptake and weight uniformity. The prepared transdermal patches showed % drug content ranging from 91.43 ± 2.90 to 98.37 ± 0.56, % swelling index from 36.98 ± 0.19 to 75.32 ± 1.21, folding endurance from 61 ± 3.14 to 78 ± 1.54 and tensile strength from 8.54 ± 0.18 to 12.87 ± 0.50. The formulation F5, containing a greater amount of hydrophilic polymers (HPMC), showed increased drug release and permeation and drug retention when compared to other formulated transdermal patch formulations (F1-F9). No significant change was observed during a stability study for a period of 60 days. The rabbit skin samples were subjected to ATR-FTIR studies, which revealed that polymers and penetration enhancers have affected skin proteins (ceramides and keratins). The pharmacokinetic profiling of optimized formulation (F5) as well as formulations with optimized concentrations of penetration enhancers revealed Cmax ranged 167.80 ng/mL to 178.07 ± 2.75 ng/mL, Tmax was 8 h to 10 h, and t1/2 was 15.9 ± 2.11 to 21.49 ± 1.16. From the in vivo studies, it was revealed that the formulation F5-OA-10% exhibited greater skin drug retention as compared to other formulations. These results depicted that prepared methotrexate transdermal patches containing different blends of hydrophobic and hydrophilic polymers along with different penetration enhancers could be safely used for the management of psoriasis. The formulated transdermal patches exhibited sustained release of drug with good permeations and retention profile. Hence, these formulated transdermal patches can effectively be used for the management of psoriasis.

High-Power Laser Deposition of Chitosan Polymers: Medical and Environmental Applications.

High-power laser irradiation interaction with natural polymers in biocomposites and Laser-Induced Chitin Deacetylation (LICD) was studied in this work, in order to produce thin films consisting of chitosan composite. The new method can lead to a cutting-edge technology, as a response to the concern regarding the accumulation of "natural biological waste" and its use. The process consists of high-power laser irradiation applied on oyster shells as the target and deposition of the ablated material on different substrates. The obtained thin films we analyzed by FTIR, UV-VIS and LIF spectroscopy, as well as SEM-EDS and AFM. All the results indicated that chitin was extracted from the shell composite material and converted to chitosan by deacetylation. It was, thus, evidenced that chemical transformation in the chitin polymer side-chain occurs during laser irradiation of the oyster shell and in the resulted plasma plume of ablation. The numerical simulation in COMSOL performed for this study anticipates and confirms the experimental results of chitin deacetylation, also providing information about the conditions required for the physico-chemical processes involved. The high sorption properties of the thin films obtained by a LICD procedure is evidenced in the study. This quality suggests that they should be used in transdermal patch construction due to the known hemostatic and antibacterial effects of chitosan. The resulting composite materials, consisting of the chitosan thin films deposited on hemp fabric, are also suitable for micro-filters in water decontamination or in other filtering processes.

Formulation and Evaluation of Hydrophilic Polymer Based Methotrexate Patches: In Vitro and In Vivo Characterization.

This study attempted to develop and evaluate controlled-release matrix-type transdermal patches with different ratios of hydrophilic polymers (sodium carboxymethylcellulose and hydroxypropyl methylcellulose) for the local delivery of methotrexate. Transdermal patches were formulated by employing a solvent casting technique using blends of sodium carboxymethylcellulose (CMC-Na) and hydroxypropylmethylcellulose (HPMC) polymers as rate-controlling agents. The F1 formulated patch served as the control formulation with a 1:1 polymer concentration. The F9 formulation served as our optimized formulation due to suitable physicochemical properties yielded through the combination of CMC-Na and HPMC (5:1). Drug excipient compatibilities (ATR-FTIR) were performed as a preformulation study. The ATR-FTIR study depicted great compatibility between the drug and the polymers. Physicochemical parameters, kinetic modeling, in vitro drug release, ex vivo drug permeation, skin drug retention, and in vivo studies were also carried out for the formulated patches. The formulated patches exhibited a clear, smooth, elastic nature with good weight uniformity, % moisture uptake, drug content, and thickness. Physicochemical characterization revealed folding endurance ranging from 62 ± 2.21 to 78 ± 1.54, tensile strength from 9.42 ± 0.52 to 12.32 ± 0.72, % swelling index from 37.16 ± 0.17 to 76.24 ± 1.37, and % drug content from 93.57 ± 5.34 to 98.19 ± 1.56. An increase in the concentration of the CMC-Na polymer (F9) resulted in increased drug release from the formulated transdermal patches. Similarly, drug permeation and retention were found to be higher in the F9 formulation compared to the other formulations (F1-F8). A drug retention analysis revealed that the F9 formulation exhibited 13.43% drug retention in the deep layers of the skin compared to other formulations (F1-F8). The stability study indicated that, during the study period of 60 days, no significant changes in the drug content and physical characteristics were found. ATR-FTIR analysis of rabbit skin samples treated with the formulated transdermal patches revealed that hydrophilic polymers mainly affect the skin proteins (ceramide and keratins). A pharmacokinetic profile revealed Cmax was 1.77.38 ng/mL, Tmax was 12 h, and t1/2 was 17.3 ± 2.21. In vivo studies showed that the skin drug retention of F9 was higher compared to the drug solution. These findings reinforce that methotrexate-based patches can possibly be used for the management of psoriasis. This study can reasonably conclude that methotrexate transdermal matrix-type patches with CMC-Na and HPMC polymers at different concentrations effectively sustain drug release with prime permeation profiles and better bioavailability. Therefore, these formulated patches can be employed for the potential management of topical diseases, such as psoriasis.

Development of monolithic matrix type transdermal patches containing cinnarizine: Physical characterization and permeation studies

To overcome the problems associated with bioavailability and systemic side effects of the drug by oral administration, monolithic matrix type transdermal patches containing cinnarizine (CNZ) were developed. For this purpose, films based on hydroxypropyl methylcellulose and polyvinylpyrrolidone as matrix-forming polymers were designed. Physical characteristics of transdermal films and drug-excipient compatibility were investigated. Factors affecting in vitro drug release and ex vivo skin penetration and permeation of the drug were studied. It was confirmed that films displayed sufficient flexibility and mechanical strength for application onto the skin for a long time period. Ex vivo penetration experiments gave satisfactory results for transdermal drug delivery through rat skin. The parameters determining good skin penetration were also evaluated. The highest drug permeation rate was obtained with incorporation of Transcutol® (0.102 mg/cm2/h) into the base CNZ formulation, followed by propylene glycol (0.063 mg/cm2/h), menthol (0.045 mg/cm2/h), and glycerin (0.021 mg/cm2/h) as penetration enhancers (p < 0.05). As a result, the developed transdermal patches of CNZ may introduce an alternative treatment for various conditions and diseases such as idiopathic urticarial vasculitis, Ménière's disease, motion sickness, nausea, and vertigo. Thus, the risk of systemic side effects caused by the drug can be reduced or eliminated

Epidermal Growth Factor in Aesthetics and Regenerative Medicine: Systematic Review.

INTRODUCTION: Epidermal Growth Factor (rhEGF) is a promising skin antiaging agent that successfully promotes skin wound repair, and it has been investigated in the past decade for these purposes. However, there are no updated systematic reviews, in English or English, that support the efficacy of rhEGF as a regenerative skin treatment or systematic reviews that compile the uses of rhEGF as facial aesthetic therapy and regenerative medicine. AIM: To describe the current state of facial aesthetic and regenerative medicine treatments in which rhEGF has been effectively used. MATERIALS AND METHODS: An exhaustive search was carried out in "Medline" (via "PubMed"), "Cochrane," "Bireme" through the Virtual Health Library (VHL), "Elsevier" via "Science Direct," "Springer," "SciELo," "ResearchGate," and Google Scholar. Studies related to the use of rhEGF in addressing skin disorders or skin aging are included. RESULTS: Overall, 49 articles were found, which described the use of rhEGF for skin regeneration and restructuring. Efficacy in the regeneration of skin wounds was verified through the intradermal and topical application of formulations with rhEGF. Most clinical trials in aesthetics point to an effective inversion of skin aging. However, uncontrolled or randomized trials abound, so that does not represent enough evidence to establish its efficiency. There are transient adverse effects for both cases. CONCLUSION: The rhEGF considers an effective therapeutic alternative for patients with recalcitrant skin wounds and skin aging, as it is a potent and specific mitogenic factor for the skin.

Smart Responsive Microarray Patches for Transdermal Drug Delivery and Biological Monitoring.

Traditional drug delivery routes possess various disadvantages which make them unsuitable for certain population groups, or indeed unsuitable for drugs with certain physicochemical properties. As a result, a variety of alternative drug delivery routes have been explored in recent decades, including transdermal drug delivery. One of the most promising novel transdermal drug delivery technologies is a microarray patch (MAP), which can bypass the outermost skin barrier and deliver drugs directly into the viable epidermis and dermis. Unlike traditional MAPs which release loaded cargo simultaneously upon insertion into the skin, stimuli responsive MAPs based on biological stimuli are able to precisely release the drug in response to the need for additional doses. Thus, smart MAPs that are only responsive to certain external stimuli are highly desirable, as they provide safer and more efficient drug delivery. In addition to drug delivery, they can also be used for biological monitoring, which further expands their applications.

Switching from blonanserin tablets to blonanserin transdermal patches improves tardive dyskinesia: A case report.

Tardive dyskinesia (TD) is a common side effect of antipsychotics, and it remains a persistent and challenging problem. The blonanserin transdermal patch, developed in Japan and launched in September 2019, is the first antipsychotic transdermal treatment. Here, we describe a patient with schizophrenia who exhibited markedly improved orofacial dyskinesia after switching from blonanserin tablets to blonanserin transdermal patches. We speculate that the patch formulation might have led to more stable plasma blonanserin levels, thus reducing the side effects. Specifically, the patch formulation might have contributed to stable plasma levels via the continuous and direct absorption of blonanserin through the skin.

Development and Evaluation of Novel Water-Based Drug-in-Adhesive Patches for the Transdermal Delivery of Ketoprofen.

The objective of this study was to develop novel water-based drug-in-adhesive pressure-sensitive adhesives (PSAs) patches for the transdermal delivery of ketoprofen, employing poly(N-vinylpyrrolidone-co-acrylic acid) copolymer (PVPAA) and poly(methyl vinyl ether-alt-maleic anhydride) (PMVEMA) as the main components. The polymers were crosslinked with tartaric acid and dihydroxyaluminium aminoacetate using various polymer ratios. Ketoprofen was incorporated into the PVPAA/PMVEMA PSAs during the patch preparation. The physicochemical properties, adhesive properties, drug content, release profile, and skin permeation of the patches were examined. Moreover, the in vivo skin irritation and skin adhesion performance in human volunteers were evaluated. The patches prepared at a weight ratio of PVPAA/PMVEMA of 1:1 presented the highest tacking strength, with desirable peeling characteristics. The ketoprofen-loaded PVPAA/PMVEMA patches exhibited superior adhesive properties, compared to the commercial patches, because the former showed an appropriate crosslinking and hydrating status with the aid of a metal coordination complex. Besides, the permeated flux of ketoprofen through the porcine skin of the ketoprofen-loaded PVPAA/PMVEMA patches (4.77 ± 1.00 µg/cm2/h) was comparable to that of the commercial patch (4.33 ± 0.80 µg/cm2/h). In human studies, the PVPAA/PMVEMA patches exhibited a better skin adhesion performance, compared with the commercial patches, without skin irritation. In addition, the patches were stable for 6 months. Therefore, these novel water-based PSAs may be a potential adhesive for preparing drug-in-adhesive patches.

Transdermal drug delivery systems for fighting common viral infectious diseases.

Transdermal drug delivery systems (TDDS) have many advantages and represent an excellent alternative to oral delivery and hypodermic injections. TDDS are more convenient and less invasive tools for disease and viral infection treatment, prevention, detection, and surveillance. The emerging development of microneedles for TDDS has facilitated improved skin barrier penetration for the delivery of macromolecules or hydrophilic drugs. Microneedle TDDS patches can be fabricated to deliver virus vaccines and potentially provide a viable alternative vaccine modality that offers improved immunogenicity, thermostability, simplicity, safety, and compliance as well as sharp-waste reduction, increased cost-effectiveness, and the capacity for self-administration, which could improve vaccine distribution. These advantages make TDDS-based vaccine delivery an especially well-suited option for treatment of widespread viral infectious diseases including pandemics. Because microneedle-based bioassays employ transdermal extraction of interstitial fluid or blood, they can be used as a minimally invasive approach for surveying disease markers and providing point-of-care (POC) diagnostics. For cutaneous viral infections, TDDS can provide localized treatment with high specificity and less systemic toxicity. In summary, TDDS, especially those that employ microneedles, possess special attributes that can be leveraged to reduce morbidity and mortality from viral infectious diseases. In this regard, they may have considerable positive impact as a modality for improving global health. In this article, we introduce the possible role and summarize the current literature regarding TDDS applications for fighting common cutaneous or systemic viral infectious diseases, including herpes simplex, varicella or herpes zoster, warts, influenza, measles, and COVID-19.

Quantitative analysis of 20 fentanyl analogues by modified QuEChERS-LC-MS/MS in health products and transdermal patches.

The spreading of narcotics especially illicit novel psychoactive substances is a continuing problem in recent years. In response to reduce the morbidity and crime related to fentanyl analogues, the accurate measurement of fentanyl analogues concentrations is significantly important in the analytical laboratories for customs checks and clinical application. In this work, ethyl acetate was selected as extraction solvent, 50 mg of PSA, 100 mg of C18, and 10 mg of GCB were optimized for purification. A modified QuEChERS extraction method followed by high performance liquid chromatography-tandem mass spectrometry with the mode of multiple reaction monitoring has been developed for the simultaneous determination of 20 fentanyl analogues in collagen peptides, slimming capsules and fentanyl transdermal patches. The limits of detection (LODs) varied from 0.004 to 0.02 µg L-1 with relative standard deviations of 4.89-11.4 % and showed good linearity in the range of 0.02-10 µg L-1 and 0.01-1.00 mg L-1, respectively. The recoveries for 20 fentanyl analogues in the low (at µg L-1 level) and high (at mg L-1 level) concentration spiked samples were in the range of 77.7-114 % and 83.9-116 %, which demonstrated the application potential of the proposed method for the determination of fentanyl analogues with low and high concentration in real case samples. In addition, the matrix effect and the cross-reactivity were also proved to not interfere with quantitation of targeted fentanyl analogues. Thus, the developed method showed high sensitivity and good accuracy, which makes it suitable for the rapid detection of fentanyl analogues for customs and border service as well as pharmaceuticals.